Family roller coaster for sale in South Africa is an outdoor recreational equipment. It is different from the normal roller coaster rides in our factory. The train of the family roller coaster mainly consists of a one locomotive and seven cars. Each car can take 2 people. The train can take 16 people. The train carries about 200 passengers per hour. The train is driven by the cart device from the platform, and after reaching the entrance of the hoist, it is lifted by the drive system to the highest end of the track. Immediately afterwards, it is turned into a free high-speed gliding along the track, sometimes dive and straight down, and sometimes the electric shuttle shuttles and roars. Visitors sit comfortably in the seat and enjoy the thrill of weightlessness and centrifugation. It is a popular project for teenagers in South Africa.


Technical Parameters of Family Roller Coaster
Height of the Track | 9.6m |
Lifting Height | 8.6m |
Track Center Distance | 800mm |
Track Length | 260m |
Operating Speed | 37km / h |
Site Area | 48m × 30m |
Number of Carriers | 16 people / column |
Number of Trains | 8 cards / column × 1 column |
Basic Type | fixed base |
Lifting Method | Chain Lifting |
Lifting Speed | 2.1m/s |
Power of the Coaster | 93.2kW |
Drive Mode | Chain lift + friction wheel drive |
Equipment Life | The train life is 10 years |
The design life of the whole machine is 20 years. |


Brief Introduction of the Family Roller Coaster Structure
-
Composition of the Equipment
The family roller coaster is mainly composed of trains, tracks, columns, lifting systems, cart devices, braking systems, pneumatic systems and control systems.
-
Train of the Family Roller Coaster
The train consists of one locomotive and seven standard cabins. Each cabin can take 2 people, and each train can accommodate 16 people at the same time.
-
Track for Family Roller Coaster
The family roller coaster track is about 260 meters long.
-
Column
Family roller coaster column form includes single column and column group.
-
Lifting System
The lifting height of the lifting system of the family roller coaster equipment for South Africa is 8.6m, and the lifting system includes rails, train drive systems, pedestrian ladders, and the like. When the train slowly reaches the lifting section from the platform, the traction hook of the train is hung on the chain, and the lifting system lifts the train to the top of the track by driving the motor drive chain, and then the train automatically de-chains down. This section is also equipped with anti-reverse racks. If the train encounters an unexpected situation in the lifting section, it needs to stop. The anti-reverse rack can prevent the train from rolling and play a role of anti-reverse.
-
Cart Device
There are 3 sets of cart devices in the operation of the equipment, which are installed in the platform area. The cart unit consists of two motors that turn to the opposite side, propelling the train through the brake pads and staying in the desired position.
-
Brake System
The roller coaster equipment is equipped with a pneumatic brake that is mounted in the brake zone and the brakes park the train in the brake zone. The trolley motor in the platform area has its own brake device. When getting on and off the passenger, the brakes in the station area can brake the train and stay in the predetermined position.
-
Brake System
The pneumatic device is actuated by a solenoid valve to open the brake device. Each brake has a separate gas cylinder and air pressure panel. When the brake pressure is reduced, the high pressure air stored in the cylinder is replenished to ensure that all brakes are effectively braked.
-
Pneumatic System
The compressed air required for the pneumatic system of the equipment is supplied by an air compressor. A pressure switch is installed at the end of the main air supply line to prevent the equipment from being put into operation when the air pressure is too low.
Electrical System for the Family Roller Coaster
The electrical system includes programmable logic controller (PLC), brake control proximity switch, vehicle body position detection proximity switch, safety lever unlock limit switch, pressure bar compression limit switch, brake status detection proximity switch, and the chain detection is close. Switch, pressure switch, 2 consoles, 1 motor control center (MCC). The device is controlled by a main console in the station, allowing automatic and manual mode switching and control.
Family Roller Coaster Rides Manufacturer for South Africa
This is one of the most popular use family roller coaster which is made in our factory for South Africa Market. Our roller coaster and many other amusement park rides has been installed in different countries in South Africa, Nigeria, Congo, Botswana, Kenya,Ethiopia and etc. Our rides are popular used in the amusement parks, funfairs, family funfair, shopping centers, playland and other different places. We offer professional amusement park design with free if you order amusement rides from Us. Welcome to contact us for price list now! Beston sales team will reply you as soon as possible.